The Season of FEST22

A Brief Overview of the Season

The 2022 season started with tension – on July 11th, we started the trip to Italy. One of the pilots tested positive for COVID-19 on July 10th, FEST22 was able to drive in half-lap increments because the car kept restarting, and two important technical inspection documents were rejected by the judges. What a start to the season! We couldn’t fix the formula car in Estonia, so we continued repairs in the middle of the night under the light of a headlamp at a local Italian parking lot. Our last-minute efforts paid off and FS Team Tallinn achieved multiple podium places and the overall victory at FS Italy with both cars!
Right after FS Italy, the driverless team headed to FS Czech. The weather conditions in dynamic events were not great, but despite the rain and by making tactically sound moves, we were the only team that managed to finish in the qualifying and endurance races. Thus, another overall victory was achieved! The FEST22 team didn’t go to Czech and went to Austria, where we were hosted by the team of Graz University of Technology before the start of the race. However, luck was not on our side at the beginning of the competition because the car stopped randomly during the skidpad, acceleration, and qualifying. We got mediocre results in the skidpad and acceleration, but by some miracle, we managed to get the second-best time of the day in qualifying, and that was even in the rain. No matter what we tried, the car still wasn’t functioning properly. 1.5 hours before the start of the endurance, the car died completely – a few printed circuit boards in the accumulator had burned out. This gave us a clue, and soon we found that the isolation on one of the motors’s wires was broken. The problem was fixed 30 minutes before the start, the accumulator was fixed 20 minutes before the start, and we arrived on the starting line just three minutes before the start. We eagerly awaited the awards ceremony, but when the results of the endurance race and overall standings were announced, our name was not called. We went to the judges to find out what was going on. It turned out that the judges’ data logger, which checks the car’s energy consumption, had not worked properly. According to the rules, this means automatic disqualification, and there was no possibility for discussion. In summary, we finished fourth, which is not bad, but the second place was close, which was frustrating. We then went to Hungary, where the FEST22 and driverless car teams met again. Unlike Austria, everything went smoothly there. Technical inspections went smoothly and we achieved good results in static events – both cars earned decent points in the cost report, and we managed to get to the design finals with FEST22. Adding podium places in driving events, second place with FEST22 and third place with the autonomous car were guaranteed in the overall standings! After a pleasant success, we went to Germany for the season’s final and most prestigious race. Although the same data logger was used there as in Austria, with the judges’ guidance, we got it working. The static events went perfectly, we achieved 3rd place in the cost report, and reached the design finals. Reaching the design finals in Germany and winning third place at autocross, are definitely some of the biggest achievements of the team!

FEST22 Stats

2.7 s

Acceleration

176 kg

Weight

1250 Nm

Torque

2.7 G

Max. lateral acceleration

550 N

Downforce (55 km/h)

140 kW

Combined power

Gallery

Some moments are meant to be captured, so that we could have something to look back to. Here are some of our most memorable moments from season 21/22.

fscdv22
FS Germany
FS Germany
meeskonnapilt-scaled.jpg
52310806268_fc9b547172_k
fs-italy22
52309604887_a8aa039fa3_k
52240639290_07a1a11704_k
52309585362_a9efdfa8a2_o

FS Austria

Design & Manufactoring 6. place
Acceleration: 4. place
Qualifications: 2. place
Overall: 4. place

FS Germany

Engineering Design: 6. place
Cost & Manufactoring : 3. place
Skidpad: 4. place
Qualifications: 3. place
Overall: 11. place

FS Italy

FEST22

Engineering Design: 1. place
Cost & Manufactoring: 3. place
Acceleration: 1. place
Endurance: 1. place
Efficiency: 2. place
Overall: 1. place

Driverless

Engineering Design: 1. place
Business Plan: 6. place
Acceleration: 1. place
Qualifications: 1. place
Trackdrive: 1. place
Overall: 1. place

FS Czech (DV)

Engineering Design: 3. place
Business Plan Presentation: 2. place
Cost & Manufactoring: 3. place
Acceleration: 3. place
Skidpad: 2. place
Qualifications: 1. place
Trackdrive: 1. place
Efficiency: 1. place
Overall: 1. place

FS East

FEST22

Engineering Design: 4. place
Business Plan Presentation: 6. place
Acceleration: 3. place
Skidpad: 3. place
Qualifications: 2. place
Endurance: 2. place
Efficiency: 3. place
Overall: 2. place

Driverless

Acceleration: 1. place
Skidpad: 4. place
Qualifications: 3. place
Trackdrive: 3. place
Efficiency: 1. place
Overall: 3. place

Management

Team Captain

Georg Kõivumägi

Chief Engineer

Marten Teppan

Chief of Electronics

Artur Lindegron 

Chief of Suspension

Mattias Laos

Chief Engineer of DV

Tauri Tammaru

DV Team Captain

Lisanne Siniväli

Chief of Composites

Kaarel Karri

The Sub-Teams

Become a part of our journey.

Contact us

Active Team

Seasons

Contact Us

Facebook Instagram Linkedin Youtube
Scroll to Top

Team Captain

Name: Kristjan Taimla

University & Programme: TalTech Product Development and Robotics BSc

Seasons in FS Team Tallinn: FEST21/22

What do you do in FS Team Tallinn?

The task of the team captain is to lead and direct the team members and be responsible for planning and organizing the entire project process. Captain role includes time and resource planning, budget management and ensuring that the team meets all project goals and requirements. It is also the captain’s job to represent the team at public appearances and presentations.

Phone:
+372 5300 6581
Email:
kristjan.taimla@formulastudent.ee
Linkedin